This control is a good control to use for heavy push items like cowl flaps and e-brakes.
It uses a multi grooved shaft which locks into a mating pin in the housing. Rotate the knob 90 degrees to lock/unlock. Control can be locked approx. every 1/8” along its 3-3/8 stroke.
Knob colors available are Black, White (Round) and Black T-Handle.
Stroke 3-3/8”
The control rod on end swivels 8 degrees
Panel nut thread size 5/8 x 18 x .¾ “ long
Flexible casing is Teflon lined and .245 Dia. Min bend radius is 6”. Max temp ratings 500-600 degrees.
Flexible casing is Teflon lined and .245 Dia. Min bend radius is 6”. Max temp ratings 500-600 degrees.
Most wire end controls like the A-1610 will need to be cut to the correct length before installation. To do this first the bag protecting the knob and set aside. Now Pull out the knob, shaft and wire assembly and set aside. With a marker, mark where you want the casing to cut. We have a nice shear to cut casing. For you, a Dremal tool, hacksaw will do. Lightly clamp the casing into a bench vise and carefully cut one coil of the casing on your mark. You can score it slightly and it will break on the score also. Be careful not to kink the casing. Deburr the trimmed casing and reassemble.